openstack/nova
Code Issues Proposed changes
nova/doc/source/admin/configuration/schedulers.rst
Sean Mooney 4939d0d1e2 Remove deprecated scheduler filters 
The RetryFilter was deprecated in Train.
The Aggregate[core|ram|disk] filters were also deprecated in train.
This change removes all four deprecated filters and their docs.

Change-Id: Idc29c759632850d3d767a261c9f385af71348f65
2020-08-11 13:25:59 +00:00

1074 lines
42 KiB
ReStructuredText
Raw Blame History

==================
Compute schedulers
==================
Compute uses the ``nova-scheduler`` service to determine how to dispatch
compute requests. For example, the ``nova-scheduler`` service determines on
which host a VM should launch. In the context of filters, the term ``host``
means a physical node that has a ``nova-compute`` service running on it. You
can configure the scheduler through a variety of options.
Compute is configured with the following default scheduler options in the
``/etc/nova/nova.conf`` file:
.. code-block:: ini
[scheduler]
driver = filter_scheduler
[filter_scheduler]
available_filters = nova.scheduler.filters.all_filters
enabled_filters = AvailabilityZoneFilter, ComputeFilter, ComputeCapabilitiesFilter, ImagePropertiesFilter, ServerGroupAntiAffinityFilter, ServerGroupAffinityFilter
By default, the scheduler ``driver`` is configured as a filter scheduler, as
described in the next section. In the default configuration, this scheduler
considers hosts that meet all the following criteria:
* Are in the requested :term:`Availability Zone` (``AvailabilityZoneFilter``).
* Can service the request (``ComputeFilter``).
* Satisfy the extra specs associated with the instance type
(``ComputeCapabilitiesFilter``).
* Satisfy any architecture, hypervisor type, or virtual machine mode properties
specified on the instance's image properties (``ImagePropertiesFilter``).
* Are on a different host than other instances of a group (if requested)
(``ServerGroupAntiAffinityFilter``).
* Are in a set of group hosts (if requested) (``ServerGroupAffinityFilter``).
The scheduler chooses a new host when an instance is migrated.
When evacuating instances from a host, the scheduler service honors the target
host defined by the administrator on the :command:`nova evacuate` command. If
a target is not defined by the administrator, the scheduler determines the
target host. For information about instance evacuation, see
:ref:`Evacuate instances <node-down-evacuate-instances>`.
.. _compute-scheduler-filters:
Prefiltering
~~~~~~~~~~~~
As of the Rocky release, the scheduling process includes a prefilter step to
increase the efficiency of subsequent stages. These prefilters are largely
optional, and serve to augment the request that is sent to placement to reduce
the set of candidate compute hosts based on attributes that placement is able
to answer for us ahead of time. In addition to the prefilters listed here, also
see :ref:`tenant-isolation-with-placement` and
:ref:`availability-zones-with-placement`.
Compute Image Type Support
--------------------------
Starting in the Train release, there is a prefilter available for
excluding compute nodes that do not support the ``disk_format`` of the
image used in a boot request. This behavior is enabled by setting
:oslo.config:option:`[scheduler]/query_placement_for_image_type_support=True
<scheduler.query_placement_for_image_type_support>`. For
example, the libvirt driver, when using ceph as an ephemeral backend,
does not support ``qcow2`` images (without an expensive conversion
step). In this case (and especially if you have a mix of ceph and
non-ceph backed computes), enabling this feature will ensure that the
scheduler does not send requests to boot a ``qcow2`` image to computes
backed by ceph.
Compute Disabled Status Support
-------------------------------
Starting in the Train release, there is a mandatory `pre-filter
<https://specs.openstack.org/openstack/nova-specs/specs/train/approved/pre-filter-disabled-computes.html>`_
which will exclude disabled compute nodes similar to (but does not fully
replace) the `ComputeFilter`_. Compute node resource providers with the
``COMPUTE_STATUS_DISABLED`` trait will be excluded as scheduling candidates.
The trait is managed by the ``nova-compute`` service and should mirror the
``disabled`` status on the related compute service record in the
`os-services`_ API. For example, if a compute service's status is ``disabled``,
the related compute node resource provider(s) for that service should have the
``COMPUTE_STATUS_DISABLED`` trait. When the service status is ``enabled`` the
``COMPUTE_STATUS_DISABLED`` trait shall be removed.
If the compute service is down when the status is changed, the trait will be
synchronized by the compute service when it is restarted. Similarly, if an
error occurs when trying to add or remove the trait on a given resource
provider, the trait will be synchronized when the ``update_available_resource``
periodic task runs - which is controlled by the
:oslo.config:option:`update_resources_interval` configuration option.
.. _os-services: https://docs.openstack.org/api-ref/compute/#compute-services-os-services
Isolate Aggregates
------------------
Starting in the Train release, there is an optional placement pre-request filter
:doc:`/reference/isolate-aggregates`
When enabled, the traits required in the server's flavor and image must be at
least those required in an aggregate's metadata in order for the server to be
eligible to boot on hosts in that aggregate.
Filter scheduler
~~~~~~~~~~~~~~~~
The filter scheduler (``nova.scheduler.filter_scheduler.FilterScheduler``) is
the default scheduler for scheduling virtual machine instances. It supports
filtering and weighting to make informed decisions on where a new instance
should be created.
When the filter scheduler receives a request for a resource, it first applies
filters to determine which hosts are eligible for consideration when
dispatching a resource. Filters are binary: either a host is accepted by the
filter, or it is rejected. Hosts that are accepted by the filter are then
processed by a different algorithm to decide which hosts to use for that
request, described in the :ref:`weights` section.
**Filtering**
.. figure:: /_static/images/filtering-workflow-1.png
The ``available_filters`` configuration option in ``nova.conf``
provides the Compute service with the list of the filters that are available
for use by the scheduler. The default setting specifies all of the filters that
are included with the Compute service:
.. code-block:: ini
[filter_scheduler]
available_filters = nova.scheduler.filters.all_filters
This configuration option can be specified multiple times. For example, if you
implemented your own custom filter in Python called ``myfilter.MyFilter`` and
you wanted to use both the built-in filters and your custom filter, your
``nova.conf`` file would contain:
.. code-block:: ini
[filter_scheduler]
available_filters = nova.scheduler.filters.all_filters
available_filters = myfilter.MyFilter
The :oslo.config:option:`filter_scheduler.enabled_filters` configuration option
in ``nova.conf`` defines the list of filters that are applied by the
``nova-scheduler`` service.
Compute filters
~~~~~~~~~~~~~~~
The following sections describe the available compute filters.
.. _AggregateImagePropertiesIsolation:
AggregateImagePropertiesIsolation
---------------------------------
Matches properties defined in an image's metadata against those of aggregates
to determine host matches:
* If a host belongs to an aggregate and the aggregate defines one or more
metadata that matches an image's properties, that host is a candidate to boot
the image's instance.
* If a host does not belong to any aggregate, it can boot instances from all
images.
For example, the following aggregate ``myWinAgg`` has the Windows operating
system as metadata (named 'windows'):
.. code-block:: console
$ openstack aggregate show myWinAgg
+-------------------+----------------------------+
| Field | Value |
+-------------------+----------------------------+
| availability_zone | zone1 |
| created_at | 2017-01-01T15:36:44.000000 |
| deleted | False |
| deleted_at | None |
| hosts | [u'sf-devel'] |
| id | 1 |
| name | myWinAgg |
| properties | os_distro='windows' |
| updated_at | None |
+-------------------+----------------------------+
In this example, because the following Win-2012 image has the ``windows``
property, it boots on the ``sf-devel`` host (all other filters being equal):
.. code-block:: console
$ openstack image show Win-2012
+------------------+------------------------------------------------------+
| Field | Value |
+------------------+------------------------------------------------------+
| checksum | ee1eca47dc88f4879d8a229cc70a07c6 |
| container_format | bare |
| created_at | 2016-12-13T09:30:30Z |
| disk_format | qcow2 |
| ... |
| name | Win-2012 |
| ... |
| properties | os_distro='windows' |
| ... |
You can configure the ``AggregateImagePropertiesIsolation`` filter by using the
following options in the ``nova.conf`` file:
.. code-block:: ini
[scheduler]
# Considers only keys matching the given namespace (string).
# Multiple values can be given, as a comma-separated list.
aggregate_image_properties_isolation_namespace = <None>
# Separator used between the namespace and keys (string).
aggregate_image_properties_isolation_separator = .
.. note::
This filter has limitations as described in `bug 1677217
<https://bugs.launchpad.net/nova/+bug/1677217>`_
which are addressed in placement :doc:`/reference/isolate-aggregates`
request filter.
Refer to :doc:`/admin/aggregates` for more information.
.. _AggregateInstanceExtraSpecsFilter:
AggregateInstanceExtraSpecsFilter
---------------------------------
Matches properties defined in extra specs for an instance type against
admin-defined properties on a host aggregate. Works with specifications that
are scoped with ``aggregate_instance_extra_specs``. Multiple values can be
given, as a comma-separated list. For backward compatibility, also works with
non-scoped specifications; this action is highly discouraged because it
conflicts with :ref:`ComputeCapabilitiesFilter` filter when you enable both
filters.
Refer to :doc:`/admin/aggregates` for more information.
.. _AggregateIoOpsFilter:
AggregateIoOpsFilter
--------------------
Filters host by disk allocation with a per-aggregate ``max_io_ops_per_host``
value. If the per-aggregate value is not found, the value falls back to the
global setting. If the host is in more than one aggregate and more than one
value is found, the minimum value will be used.
Refer to :doc:`/admin/aggregates` and :ref:`IoOpsFilter` for more information.
.. _AggregateMultiTenancyIsolation:
AggregateMultiTenancyIsolation
------------------------------
Ensures hosts in tenant-isolated host aggregates will only be available to a
specified set of tenants. If a host is in an aggregate that has the
``filter_tenant_id`` metadata key, the host can build instances from only that
tenant or comma-separated list of tenants. A host can be in different
aggregates. If a host does not belong to an aggregate with the metadata key,
the host can build instances from all tenants. This does not restrict the
tenant from creating servers on hosts outside the tenant-isolated aggregate.
For example, consider there are two available hosts for scheduling, HostA and
HostB. HostB is in an aggregate isolated to tenant X. A server create request
from tenant X will result in either HostA *or* HostB as candidates during
scheduling. A server create request from another tenant Y will result in only
HostA being a scheduling candidate since HostA is not part of the
tenant-isolated aggregate.
.. note::
There is a `known limitation
<https://bugs.launchpad.net/nova/+bug/1802111>`_ with the number of tenants
that can be isolated per aggregate using this filter. This limitation does
not exist, however, for the :ref:`tenant-isolation-with-placement`
filtering capability added in the 18.0.0 Rocky release.
.. _AggregateNumInstancesFilter:
AggregateNumInstancesFilter
---------------------------
Filters host by number of instances with a per-aggregate
``max_instances_per_host`` value. If the per-aggregate value is not found, the
value falls back to the global setting. If the host is in more than one
aggregate and thus more than one value is found, the minimum value will be
used.
Refer to :doc:`/admin/aggregates` and :ref:`NumInstancesFilter` for more
information.
.. _AggregateTypeAffinityFilter:
AggregateTypeAffinityFilter
---------------------------
This filter passes hosts if no ``instance_type`` key is set or the
``instance_type`` aggregate metadata value contains the name of the
``instance_type`` requested. The value of the ``instance_type`` metadata entry
is a string that may contain either a single ``instance_type`` name or a
comma-separated list of ``instance_type`` names, such as ``m1.nano`` or
``m1.nano,m1.small``.
Refer to :doc:`/admin/aggregates` for more information.
AllHostsFilter
--------------
This is a no-op filter. It does not eliminate any of the available hosts.
.. _AvailabilityZoneFilter:
AvailabilityZoneFilter
----------------------
Filters hosts by availability zone. You must enable this filter for the
scheduler to respect availability zones in requests.
Refer to :doc:`/admin/availability-zones` for more information.
.. _ComputeCapabilitiesFilter:
ComputeCapabilitiesFilter
-------------------------
Matches properties defined in extra specs for an instance type against compute
capabilities. If an extra specs key contains a colon (``:``), anything before
the colon is treated as a namespace and anything after the colon is treated as
the key to be matched. If a namespace is present and is not ``capabilities``,
the filter ignores the namespace. For backward compatibility, also treats the
extra specs key as the key to be matched if no namespace is present; this
action is highly discouraged because it conflicts with
:ref:`AggregateInstanceExtraSpecsFilter` filter when you enable both filters.
Some virt drivers support reporting CPU traits to the Placement service. With that
feature available, you should consider using traits in flavors instead of
ComputeCapabilitiesFilter, because traits provide consistent naming for CPU
features in some virt drivers and querying traits is efficient. For more detail, please see
`Support Matrix <https://docs.openstack.org/nova/latest/user/support-matrix.html>`_,
:ref:`Required traits <extra-specs-required-traits>`,
:ref:`Forbidden traits <extra-specs-forbidden-traits>` and
`Report CPU features to the Placement service <https://specs.openstack.org/openstack/nova-specs/specs/rocky/approved/report-cpu-features-as-traits.html>`_.
Also refer to `Compute capabilities as traits`_.
.. _ComputeFilter:
ComputeFilter
-------------
Passes all hosts that are operational and enabled.
In general, you should always enable this filter.
DifferentHostFilter
-------------------
Schedules the instance on a different host from a set of instances. To take
advantage of this filter, the requester must pass a scheduler hint, using
``different_host`` as the key and a list of instance UUIDs as the value. This
filter is the opposite of the ``SameHostFilter``. Using the
:command:`openstack server create` command, use the ``--hint`` flag. For
example:
.. code-block:: console
$ openstack server create --image cedef40a-ed67-4d10-800e-17455edce175 \
--flavor 1 --hint different_host=a0cf03a5-d921-4877-bb5c-86d26cf818e1 \
--hint different_host=8c19174f-4220-44f0-824a-cd1eeef10287 server-1
With the API, use the ``os:scheduler_hints`` key. For example:
.. code-block:: json
{
"server": {
"name": "server-1",
"imageRef": "cedef40a-ed67-4d10-800e-17455edce175",
"flavorRef": "1"
},
"os:scheduler_hints": {
"different_host": [
"a0cf03a5-d921-4877-bb5c-86d26cf818e1",
"8c19174f-4220-44f0-824a-cd1eeef10287"
]
}
}
.. _ImagePropertiesFilter:
ImagePropertiesFilter
---------------------
Filters hosts based on properties defined on the instance's image. It passes
hosts that can support the specified image properties contained in the
instance. Properties include the architecture, hypervisor type, hypervisor
version (for Xen hypervisor type only), and virtual machine mode.
For example, an instance might require a host that runs an ARM-based processor,
and QEMU as the hypervisor. You can decorate an image with these properties by
using:
.. code-block:: console
$ openstack image set --architecture arm --property hypervisor_type=qemu \
img-uuid
The image properties that the filter checks for are:
``architecture``
describes the machine architecture required by the image. Examples are
``i686``, ``x86_64``, ``arm``, and ``ppc64``.
``hypervisor_type``
describes the hypervisor required by the image. Examples are ``xen``,
``qemu``, and ``xenapi``.
.. note::
``qemu`` is used for both QEMU and KVM hypervisor types.
``hypervisor_version_requires``
describes the hypervisor version required by the image. The property is
supported for Xen hypervisor type only. It can be used to enable support for
multiple hypervisor versions, and to prevent instances with newer Xen tools
from being provisioned on an older version of a hypervisor. If available, the
property value is compared to the hypervisor version of the compute host.
To filter the hosts by the hypervisor version, add the
``hypervisor_version_requires`` property on the image as metadata and pass an
operator and a required hypervisor version as its value:
.. code-block:: console
$ openstack image set --property hypervisor_type=xen --property \
hypervisor_version_requires=">=4.3" img-uuid
``vm_mode``
describes the hypervisor application binary interface (ABI) required by the
image. Examples are ``xen`` for Xen 3.0 paravirtual ABI, ``hvm`` for native
ABI, ``uml`` for User Mode Linux paravirtual ABI, ``exe`` for container virt
executable ABI.
IsolatedHostsFilter
-------------------
Allows the admin to define a special (isolated) set of images and a special
(isolated) set of hosts, such that the isolated images can only run on the
isolated hosts, and the isolated hosts can only run isolated images. The flag
``restrict_isolated_hosts_to_isolated_images`` can be used to force isolated
hosts to only run isolated images.
The logic within the filter depends on the
``restrict_isolated_hosts_to_isolated_images`` config option, which defaults
to True. When True, a volume-backed instance will not be put on an isolated
host. When False, a volume-backed instance can go on any host, isolated or
not.
The admin must specify the isolated set of images and hosts in the
``nova.conf`` file using the ``isolated_hosts`` and ``isolated_images``
configuration options. For example:
.. code-block:: ini
[filter_scheduler]
isolated_hosts = server1, server2
isolated_images = 342b492c-128f-4a42-8d3a-c5088cf27d13, ebd267a6-ca86-4d6c-9a0e-bd132d6b7d09
.. _IoOpsFilter:
IoOpsFilter
-----------
The IoOpsFilter filters hosts by concurrent I/O operations on it. Hosts with
too many concurrent I/O operations will be filtered out. The
``max_io_ops_per_host`` option specifies the maximum number of I/O intensive
instances allowed to run on a host. A host will be ignored by the scheduler if
more than ``max_io_ops_per_host`` instances in build, resize, snapshot,
migrate, rescue or unshelve task states are running on it.
JsonFilter
----------
.. warning:: This filter is not enabled by default and not comprehensively
tested, and thus could fail to work as expected in non-obvious ways.
Furthermore, the filter variables are based on attributes of the
`HostState`_ class which could change from release to release so usage
of this filter is generally not recommended. Consider using other filters
such as the :ref:`ImagePropertiesFilter` or
:ref:`traits-based scheduling <extra-specs-required-traits>`.
The JsonFilter allows a user to construct a custom filter by passing a
scheduler hint in JSON format. The following operators are supported:
* =
* <
* >
* in
* <=
* >=
* not
* or
* and
The filter supports any attribute in the `HostState`_ class such as the
following variables:
* ``$free_ram_mb``
* ``$free_disk_mb``
* ``$hypervisor_hostname``
* ``$total_usable_ram_mb``
* ``$vcpus_total``
* ``$vcpus_used``
Using the :command:`openstack server create` command, use the ``--hint`` flag:
.. code-block:: console
$ openstack server create --image 827d564a-e636-4fc4-a376-d36f7ebe1747 \
--flavor 1 --hint query='[">=","$free_ram_mb",1024]' server1
With the API, use the ``os:scheduler_hints`` key:
.. code-block:: json
{
"server": {
"name": "server-1",
"imageRef": "cedef40a-ed67-4d10-800e-17455edce175",
"flavorRef": "1"
},
"os:scheduler_hints": {
"query": "[\">=\",\"$free_ram_mb\",1024]"
}
}
.. _HostState: https://opendev.org/openstack/nova/src/branch/master/nova/scheduler/host_manager.py
MetricsFilter
-------------
Filters hosts based on meters ``weight_setting``. Only hosts with the
available meters are passed so that the metrics weigher will not fail due to
these hosts.
NUMATopologyFilter
------------------
Filters hosts based on the NUMA topology that was specified for the instance
through the use of flavor ``extra_specs`` in combination with the image
properties, as described in detail in the `related nova-spec document
<http://specs.openstack.org/openstack/
nova-specs/specs/juno/implemented/virt-driver-numa-placement.html>`_. Filter
will try to match the exact NUMA cells of the instance to those of the host. It
will consider the standard over-subscription limits for each host NUMA cell,
and provide limits to the compute host accordingly.
.. note::
If instance has no topology defined, it will be considered for any host. If
instance has a topology defined, it will be considered only for NUMA capable
hosts.
.. _NumInstancesFilter:
NumInstancesFilter
------------------
Hosts that have more instances running than specified by the
``max_instances_per_host`` option are filtered out when this filter is in
place.
PciPassthroughFilter
--------------------
The filter schedules instances on a host if the host has devices that meet the
device requests in the ``extra_specs`` attribute for the flavor.
SameHostFilter
--------------
Schedules the instance on the same host as another instance in a set of
instances. To take advantage of this filter, the requester must pass a
scheduler hint, using ``same_host`` as the key and a list of instance UUIDs as
the value. This filter is the opposite of the ``DifferentHostFilter``. Using
the :command:`openstack server create` command, use the ``--hint`` flag:
.. code-block:: console
$ openstack server create --image cedef40a-ed67-4d10-800e-17455edce175 \
--flavor 1 --hint same_host=a0cf03a5-d921-4877-bb5c-86d26cf818e1 \
--hint same_host=8c19174f-4220-44f0-824a-cd1eeef10287 server-1
With the API, use the ``os:scheduler_hints`` key:
.. code-block:: json
{
"server": {
"name": "server-1",
"imageRef": "cedef40a-ed67-4d10-800e-17455edce175",
"flavorRef": "1"
},
"os:scheduler_hints": {
"same_host": [
"a0cf03a5-d921-4877-bb5c-86d26cf818e1",
"8c19174f-4220-44f0-824a-cd1eeef10287"
]
}
}
.. _ServerGroupAffinityFilter:
ServerGroupAffinityFilter
-------------------------
The ServerGroupAffinityFilter ensures that an instance is scheduled on to a
host from a set of group hosts. To take advantage of this filter, the requester
must create a server group with an ``affinity`` policy, and pass a scheduler
hint, using ``group`` as the key and the server group UUID as the value. Using
the :command:`openstack server create` command, use the ``--hint`` flag. For
example:
.. code-block:: console
$ openstack server group create --policy affinity group-1
$ openstack server create --image IMAGE_ID --flavor 1 \
--hint group=SERVER_GROUP_UUID server-1
.. _ServerGroupAntiAffinityFilter:
ServerGroupAntiAffinityFilter
-----------------------------
The ServerGroupAntiAffinityFilter ensures that each instance in a group is on a
different host. To take advantage of this filter, the requester must create a
server group with an ``anti-affinity`` policy, and pass a scheduler hint, using
``group`` as the key and the server group UUID as the value. Using the
:command:`openstack server create` command, use the ``--hint`` flag. For
example:
.. code-block:: console
$ openstack server group create --policy anti-affinity group-1
$ openstack server create --image IMAGE_ID --flavor 1 \
--hint group=SERVER_GROUP_UUID server-1
SimpleCIDRAffinityFilter
------------------------
Schedules the instance based on host IP subnet range. To take advantage of
this filter, the requester must specify a range of valid IP address in CIDR
format, by passing two scheduler hints:
``build_near_host_ip``
The first IP address in the subnet (for example, ``192.168.1.1``)
``cidr``
The CIDR that corresponds to the subnet (for example, ``/24``)
Using the :command:`openstack server create` command, use the ``--hint`` flag.
For example, to specify the IP subnet ``192.168.1.1/24``:
.. code-block:: console
$ openstack server create --image cedef40a-ed67-4d10-800e-17455edce175 \
--flavor 1 --hint build_near_host_ip=192.168.1.1 --hint cidr=/24 server-1
With the API, use the ``os:scheduler_hints`` key:
.. code-block:: json
{
"server": {
"name": "server-1",
"imageRef": "cedef40a-ed67-4d10-800e-17455edce175",
"flavorRef": "1"
},
"os:scheduler_hints": {
"build_near_host_ip": "192.168.1.1",
"cidr": "24"
}
}
.. _weights:
Weights
~~~~~~~
When resourcing instances, the filter scheduler filters and weights each host
in the list of acceptable hosts. Each time the scheduler selects a host, it
virtually consumes resources on it, and subsequent selections are adjusted
accordingly. This process is useful when the customer asks for the same large
amount of instances, because weight is computed for each requested instance.
All weights are normalized before being summed up; the host with the largest
weight is given the highest priority.
**Weighting hosts**
.. figure:: /_static/images/nova-weighting-hosts.png
Hosts are weighted based on the following options in the
``/etc/nova/nova.conf`` file:
.. list-table:: Host weighting options
:header-rows: 1
:widths: 10, 25, 60
* - Section
- Option
- Description
* - [DEFAULT]
- ``ram_weight_multiplier``
- By default, the scheduler spreads instances across all hosts evenly.
Set the ``ram_weight_multiplier`` option to a negative number if you
prefer stacking instead of spreading. Use a floating-point value.
If the per aggregate ``ram_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [DEFAULT]
- ``disk_weight_multiplier``
- By default, the scheduler spreads instances across all hosts evenly.
Set the ``disk_weight_multiplier`` option to a negative number if you
prefer stacking instead of spreading. Use a floating-point value.
If the per aggregate ``disk_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [DEFAULT]
- ``cpu_weight_multiplier``
- By default, the scheduler spreads instances across all hosts evenly.
Set the ``cpu_weight_multiplier`` option to a negative number if you
prefer stacking instead of spreading. Use a floating-point value.
If the per aggregate ``cpu_weight_multiplier`` metadata is set, this
multiplier will override the configuration option value.
* - [DEFAULT]
- ``scheduler_host_subset_size``
- New instances are scheduled on a host that is chosen randomly from a
subset of the N best hosts. This property defines the subset size from
which a host is chosen. A value of 1 chooses the first host returned by
the weighting functions. This value must be at least 1. A value less
than 1 is ignored, and 1 is used instead. Use an integer value.
* - [DEFAULT]
- ``scheduler_weight_classes``
- Defaults to ``nova.scheduler.weights.all_weighers``. Hosts are then
weighted and sorted with the largest weight winning.
* - [DEFAULT]
- ``io_ops_weight_multiplier``
- Multiplier used for weighing host I/O operations. A negative value means
a preference to choose light workload compute hosts.
If the per aggregate ``io_ops_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [filter_scheduler]
- ``soft_affinity_weight_multiplier``
- Multiplier used for weighing hosts for group soft-affinity. Only a
positive value is allowed.
* - [filter_scheduler]
If the per aggregate ``soft_affinity_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
- ``soft_anti_affinity_weight_multiplier``
- Multiplier used for weighing hosts for group soft-anti-affinity. Only a
positive value is allowed.
If the per aggregate ``soft_anti_affinity_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [filter_scheduler]
- ``build_failure_weight_multiplier``
- Multiplier used for weighing hosts which have recent build failures. A
positive value increases the significance of build failures reported by
the host recently, making them less likely to be chosen.
If the per aggregate ``build_failure_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [filter_scheduler]
- ``cross_cell_move_weight_multiplier``
- Multiplier used for weighing hosts during a cross-cell move. By default,
prefers hosts within the same source cell when migrating a server.
If the per aggregate ``cross_cell_move_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [metrics]
- ``weight_multiplier``
- Multiplier for weighting meters. Use a floating-point value.
If the per aggregate ``metrics_weight_multiplier``
metadata is set, this multiplier will override the configuration option
value.
* - [metrics]
- ``weight_setting``
- Determines how meters are weighted. Use a comma-separated list of
metricName=ratio. For example: ``name1=1.0, name2=-1.0`` results in:
``name1.value * 1.0 + name2.value * -1.0``
* - [metrics]
- ``required``
- Specifies how to treat unavailable meters:
* True - Raises an exception. To avoid the raised exception, you should
use the scheduler filter ``MetricFilter`` to filter out hosts with
unavailable meters.
* False - Treated as a negative factor in the weighting process (uses
the ``weight_of_unavailable`` option).
* - [metrics]
- ``weight_of_unavailable``
- If ``required`` is set to False, and any one of the meters set by
``weight_setting`` is unavailable, the ``weight_of_unavailable`` value
is returned to the scheduler.
For example:
.. code-block:: ini
[DEFAULT]
scheduler_host_subset_size = 1
scheduler_weight_classes = nova.scheduler.weights.all_weighers
ram_weight_multiplier = 1.0
io_ops_weight_multiplier = 2.0
soft_affinity_weight_multiplier = 1.0
soft_anti_affinity_weight_multiplier = 1.0
[metrics]
weight_multiplier = 1.0
weight_setting = name1=1.0, name2=-1.0
required = false
weight_of_unavailable = -10000.0
Utilization aware scheduling
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is possible to schedule VMs using advanced scheduling decisions. These
decisions are made based on enhanced usage statistics encompassing data like
memory cache utilization, memory bandwidth utilization, or network bandwidth
utilization. This is disabled by default. The administrator can configure how
the metrics are weighted in the configuration file by using the
``weight_setting`` configuration option in the ``nova.conf`` configuration
file. For example to configure metric1 with ratio1 and metric2 with ratio2:
.. code-block:: ini
weight_setting = "metric1=ratio1, metric2=ratio2"
XenServer hypervisor pools to support live migration
----------------------------------------------------
When using the XenAPI-based hypervisor, the Compute service uses host
aggregates to manage XenServer Resource pools, which are used in supporting
live migration.
Allocation ratios
~~~~~~~~~~~~~~~~~
The following configuration options exist to control allocation ratios
per compute node to support over-commit of resources:
* :oslo.config:option:`cpu_allocation_ratio`: allows overriding the VCPU
inventory allocation ratio for a compute node
* :oslo.config:option:`ram_allocation_ratio`: allows overriding the MEMORY_MB
inventory allocation ratio for a compute node
* :oslo.config:option:`disk_allocation_ratio`: allows overriding the DISK_GB
inventory allocation ratio for a compute node
Prior to the 19.0.0 Stein release, if left unset, the ``cpu_allocation_ratio``
defaults to 16.0, the ``ram_allocation_ratio`` defaults to 1.5, and the
``disk_allocation_ratio`` defaults to 1.0.
Starting with the 19.0.0 Stein release, the following configuration options
control the initial allocation ratio values for a compute node:
* :oslo.config:option:`initial_cpu_allocation_ratio`: the initial VCPU
inventory allocation ratio for a new compute node record, defaults to 16.0
* :oslo.config:option:`initial_ram_allocation_ratio`: the initial MEMORY_MB
inventory allocation ratio for a new compute node record, defaults to 1.5
* :oslo.config:option:`initial_disk_allocation_ratio`: the initial DISK_GB
inventory allocation ratio for a new compute node record, defaults to 1.0
Scheduling considerations
-------------------------
The allocation ratio configuration is used both during reporting of compute
node `resource provider inventory`_ to the placement service and during
scheduling.
.. _resource provider inventory: https://docs.openstack.org/api-ref/placement/?expanded=#resource-provider-inventories
Usage scenarios
---------------
Since allocation ratios can be set via nova configuration, host aggregate
metadata and the placement API, it can be confusing to know which should be
used. This really depends on your scenario. A few common scenarios are detailed
here.
1. When the deployer wants to **always** set an override value for a resource
on a compute node, the deployer would ensure that the
``[DEFAULT]/cpu_allocation_ratio``, ``[DEFAULT]/ram_allocation_ratio`` and
``[DEFAULT]/disk_allocation_ratio`` configuration options are set to a
non-None value (or greater than 0.0 before the 19.0.0 Stein release). This
will make the ``nova-compute`` service overwrite any externally-set
allocation ratio values set via the placement REST API.
2. When the deployer wants to set an **initial** value for a compute node
allocation ratio but wants to allow an admin to adjust this afterwards
without making any configuration file changes, the deployer would set the
``[DEFAULT]/initial_cpu_allocation_ratio``,
``[DEFAULT]/initial_ram_allocation_ratio`` and
``[DEFAULT]/initial_disk_allocation_ratio`` configuration options and then
manage the allocation ratios using the placement REST API (or
`osc-placement`_ command line interface). For example:
.. code-block:: console
$ openstack resource provider inventory set --resource VCPU:allocation_ratio=1.0 815a5634-86fb-4e1e-8824-8a631fee3e06
3. When the deployer wants to **always** use the placement API to set
allocation ratios, then the deployer should ensure that
``[DEFAULT]/xxx_allocation_ratio`` options are all set to None (the
default since 19.0.0 Stein, 0.0 before Stein) and then
manage the allocation ratios using the placement REST API (or
`osc-placement`_ command line interface).
This scenario is the workaround for
`bug 1804125 <https://bugs.launchpad.net/nova/+bug/1804125>`_.
.. _osc-placement: https://docs.openstack.org/osc-placement/latest/index.html
.. _hypervisor-specific-considerations:
Hypervisor-specific considerations
----------------------------------
Nova provides three configuration options,
:oslo.config:option:`reserved_host_cpus`,
:oslo.config:option:`reserved_host_memory_mb`, and
:oslo.config:option:`reserved_host_disk_mb`, that can be used to set aside some
number of resources that will not be consumed by an instance, whether these
resources are overcommitted or not. Some virt drivers may benefit from the use
of these options to account for hypervisor-specific overhead.
HyperV
Hyper-V creates a VM memory file on the local disk when an instance starts.
The size of this file corresponds to the amount of RAM allocated to the
instance.
You should configure the
:oslo.config:option:`reserved_host_disk_mb` config option to
account for this overhead, based on the amount of memory available
to instances.
XenAPI
XenServer memory overhead is proportional to the size of the VM and larger
flavor VMs become more efficient with respect to overhead. This overhead
can be calculated using the following formula::
overhead (MB) = (instance.memory * 0.00781) + (instance.vcpus * 1.5) + 3
You should configure the
:oslo.config:option:`reserved_host_memory_mb` config option to
account for this overhead, based on the size of your hosts and
instances. For more information, refer to
https://wiki.openstack.org/wiki/XenServer/Overhead.
Cells considerations
~~~~~~~~~~~~~~~~~~~~
By default cells are enabled for scheduling new instances but they can be
disabled (new schedulings to the cell are blocked). This may be useful for
users while performing cell maintenance, failures or other interventions. It is
to be noted that creating pre-disabled cells and enabling/disabling existing
cells should either be followed by a restart or SIGHUP of the nova-scheduler
service for the changes to take effect.
Command-line interface
----------------------
The :command:`nova-manage` command-line client supports the cell-disable
related commands. To enable or disable a cell, use
:command:`nova-manage cell_v2 update_cell` and to create pre-disabled cells,
use :command:`nova-manage cell_v2 create_cell`. See the
:ref:`man-page-cells-v2` man page for details on command usage.
.. _compute-capabilities-as-traits:
Compute capabilities as traits
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Starting with the 19.0.0 Stein release, the ``nova-compute`` service will
report certain ``COMPUTE_*`` traits based on its compute driver capabilities
to the placement service. The traits will be associated with the resource
provider for that compute service. These traits can be used during scheduling
by configuring flavors with
:ref:`Required traits <extra-specs-required-traits>` or
:ref:`Forbidden traits <extra-specs-forbidden-traits>`. For example, if you
have a host aggregate with a set of compute nodes that support multi-attach
volumes, you can restrict a flavor to that aggregate by adding the
``trait:COMPUTE_VOLUME_MULTI_ATTACH=required`` extra spec to the flavor and
then restrict the flavor to the aggregate
:ref:`as normal <config-sch-for-aggs>`.
Here is an example of a libvirt compute node resource provider that is
exposing some CPU features as traits, driver capabilities as traits, and a
custom trait denoted by the ``CUSTOM_`` prefix:
.. code-block:: console
$ openstack --os-placement-api-version 1.6 resource provider trait list \
> d9b3dbc4-50e2-42dd-be98-522f6edaab3f --sort-column name
+---------------------------------------+
| name |
+---------------------------------------+
| COMPUTE_DEVICE_TAGGING |
| COMPUTE_NET_ATTACH_INTERFACE |
| COMPUTE_NET_ATTACH_INTERFACE_WITH_TAG |
| COMPUTE_TRUSTED_CERTS |
| COMPUTE_VOLUME_ATTACH_WITH_TAG |
| COMPUTE_VOLUME_EXTEND |
| COMPUTE_VOLUME_MULTI_ATTACH |
| CUSTOM_IMAGE_TYPE_RBD |
| HW_CPU_X86_MMX |
| HW_CPU_X86_SSE |
| HW_CPU_X86_SSE2 |
| HW_CPU_X86_SVM |
+---------------------------------------+
**Rules**
There are some rules associated with capability-defined traits.
1. The compute service "owns" these traits and will add/remove them when the
``nova-compute`` service starts and when the ``update_available_resource``
periodic task runs, with run intervals controlled by config option
:oslo.config:option:`update_resources_interval`.
2. The compute service will not remove any custom traits set on the resource
provider externally, such as the ``CUSTOM_IMAGE_TYPE_RBD`` trait in the
example above.
3. If compute-owned traits are removed from the resource provider externally,
for example by running ``openstack resource provider trait delete <rp_uuid>``,
the compute service will add its traits again on restart or SIGHUP.
4. If a compute trait is set on the resource provider externally which is not
supported by the driver, for example by adding the ``COMPUTE_VOLUME_EXTEND``
trait when the driver does not support that capability, the compute service
will automatically remove the unsupported trait on restart or SIGHUP.
5. Compute capability traits are standard traits defined in the `os-traits`_
library.
.. _os-traits: https://opendev.org/openstack/os-traits/src/branch/master/os_traits/compute
:ref:`Further information on capabilities and traits
<taxonomy_of_traits_and_capabilities>` can be found in the
:doc:`Technical Reference Deep Dives section </reference/index>`.
View Git Blame Copy Permalink