kayobe/ansible/roles/kolla-ansible/templates/globals.yml.j2

---
# {{ ansible_managed }}

# You can use this file to override _any_ variable throughout Kolla.
# Additional options can be found in the
# 'kolla-ansible/ansible/group_vars/all.yml' file. Default value of all the
# commented parameters are shown here, To override the default value uncomment
# the parameter and change its value.

###############
# Kolla options
###############
# Valid options are [ COPY_ONCE, COPY_ALWAYS ]
config_strategy: "COPY_ALWAYS"

# Valid options are ['centos', 'debian', 'oraclelinux', 'rhel', 'ubuntu']
kolla_base_distro: "{{ kolla_base_distro }}"

# Valid options are [ binary, source ]
kolla_install_type: "{{ kolla_install_type }}"

# Valid option is Docker repository tag
openstack_release: "{{ kolla_openstack_release }}"

# Location of configuration overrides
node_custom_config: "{{ kolla_node_custom_config_path }}"

# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. If you want to run an
# All-In-One without haproxy and keepalived, you can set enable_haproxy to no
# in "OpenStack options" section, and set this value to the IP of your
# 'network_interface' as set in the Networking section below.
kolla_internal_vip_address: "{{ kolla_internal_vip_address }}"

# This is the DNS name that maps to the kolla_internal_vip_address VIP. By
# default it is the same as kolla_internal_vip_address.
kolla_internal_fqdn: "{{ kolla_internal_fqdn }}"

# This should be a VIP, an unused IP on your network that will float between
# the hosts running keepalived for high-availability. It defaults to the
# kolla_internal_vip_address, allowing internal and external communication to
# share the same address.  Specify a kolla_external_vip_address to separate
# internal and external requests between two VIPs.
kolla_external_vip_address: "{{ kolla_external_vip_address }}"

# The Public address used to communicate with OpenStack as set in the public_url
# for the endpoints that will be created. This DNS name should map to
# kolla_external_vip_address.
kolla_external_fqdn: "{{ kolla_external_fqdn }}"

# User account to use for Kolla SSH access.
kolla_user: "{{ kolla_ansible_user }}"

# Primary group of Kolla SSH user.
kolla_group: "{{ kolla_ansible_group }}"

################
# Docker options
################
### Example: Private repository with authentication

#docker_registry: "172.16.0.10:4000"
{% if kolla_docker_registry %}
docker_registry: "{{ kolla_docker_registry }}"
{% endif %}
docker_namespace: "{{ kolla_docker_namespace }}"
{% if kolla_docker_registry_username and kolla_docker_registry_password %}
docker_registry_username: "{{ kolla_docker_registry_username }}"
docker_registry_password: "{{ kolla_docker_registry_password }}"
{% endif %}

###################
# Messaging options
###################
# Below is an example of an separate backend that provides brokerless
# messaging for oslo.messaging RPC communications

#om_rpc_transport: "amqp"
#om_rpc_user: "{% raw %}{{ qdrouterd_user }}{% endraw %}"
#om_rpc_password: "{% raw %}{{ qdrouterd_password }}{% endraw %}"
#om_rpc_port: "{% raw %}{{ qdrouterd_port }}{% endraw %}"
#om_rpc_group: "qdrouterd"


##############################
# Neutron - Networking Options
##############################
# This interface is what all your api services will be bound to by default.
# Additionally, all vxlan/tunnel and storage network traffic will go over this
# interface by default. This interface must contain an IPv4 address.
# It is possible for hosts to have non-matching names of interfaces - these can
# be set in an inventory file per host or per group or stored separately, see
#     http://docs.ansible.com/ansible/intro_inventory.html
# Yet another way to workaround the naming problem is to create a bond for the
# interface on all hosts and give the bond name here. Similar strategy can be
# followed for other types of interfaces.
#
# NOTE: Most network interfaces are configured via the inventory and are
# therefore not set here.

# Valid options are [ openvswitch, linuxbridge ]
neutron_plugin_agent: "openvswitch"

# Comma-separated names of neutron ML2 type drivers.
{% if kolla_neutron_ml2_type_drivers %}
neutron_type_drivers: {{ kolla_neutron_ml2_type_drivers | join(',') }}
{% endif %}

# Comma-separated types of tenant networks (should be listed in 'neutron_type_drivers')
# NOTE: for ironic this list should also contain 'flat'
{% if kolla_neutron_ml2_tenant_network_types %}
neutron_tenant_network_types: {{ kolla_neutron_ml2_tenant_network_types | join(',') }}
{% endif %}


####################
# keepalived options
####################
# Arbitrary unique number from 0..255
#keepalived_virtual_router_id: "51"


#############
# TLS options
#############
# To provide encryption and authentication on the kolla_external_vip_interface,
# TLS can be enabled.  When TLS is enabled, certificates must be provided to
# allow clients to perform authentication.
kolla_enable_tls_external: {{ kolla_enable_tls_external | bool }}
kolla_external_fqdn_cert: "{{ kolla_external_fqdn_cert }}"
kolla_external_fqdn_cacert: "{{ kolla_external_fqdn_cacert }}"


##############
# OpenDaylight
##############
#enable_opendaylight_qos: "no"
#enable_opendaylight_l3: "yes"

###################
# OpenStack options
###################
# Use these options to set the various log levels across all OpenStack projects
# Valid options are [ True, False ]
openstack_logging_debug: {{ kolla_openstack_logging_debug | bool }}

# Valid options are [ none, novnc, spice, rdp ]
#nova_console: "novnc"

# OpenStack services can be enabled or disabled with these options
{% for feature_flag in kolla_feature_flags %}
{% if ('kolla_enable_' ~ feature_flag) in hostvars[inventory_hostname] %}
enable_{{ feature_flag }}: {{ hostvars[inventory_hostname]['kolla_enable_' ~ feature_flag] | bool }}
{% endif %}
{% endfor %}

##############
# Ceph options
##############
# Ceph can be setup with a caching to improve performance. To use the cache you
# must provide separate disks than those for the OSDs
#ceph_enable_cache: "no"

# Set to no if using external Ceph without cephx.
#external_ceph_cephx_enabled: "yes"

# Ceph is not able to determine the size of a cache pool automatically,
# so the configuration on the absolute size is required here, otherwise the flush/evict will not work.
#ceph_target_max_bytes: ""
#ceph_target_max_objects: ""

# Valid options are [ forward, none, writeback ]
#ceph_cache_mode: "writeback"

# A requirement for using the erasure-coded pools is you must setup a cache tier
# Valid options are [ erasure, replicated ]
#ceph_pool_type: "replicated"

# Integrate ceph rados object gateway with openstack keystone
#enable_ceph_rgw_keystone: "no"

# Set the pgs and pgps for pool
#ceph_pool_pg_num: 128
#ceph_pool_pgp_num: 128

#############################
# Keystone - Identity Options
#############################

# Valid options are [ fernet ]
#keystone_token_provider: 'fernet'

# Interval to rotate fernet keys by (in seconds). Must be an interval of
# 60(1 min), 120(2 min), 180(3 min), 240(4 min), 300(5 min), 360(6 min),
# 600(10 min), 720(12 min), 900(15 min), 1200(20 min), 1800(30 min),
# 3600(1 hour), 7200(2 hour), 10800(3 hour), 14400(4 hour), 21600(6 hour),
# 28800(8 hour), 43200(12 hour), 86400(1 day), 604800(1 week).
#fernet_token_expiry: 86400

#######################
# Nova options
#######################
#nova_backend_ceph: "{% raw %}{{ enable_ceph }}{% endraw %}"


#######################
# Horizon options
#######################
#horizon_backend_database: "no"

########################
# Glance - Image Options
########################
# Configure image backend.
#glance_backend_file: "yes"
#glance_backend_ceph: "no"
#glance_backend_vmware: "no"
#glance_backend_swift: "no"


##################
# Barbican options
##################
# Valid options are [ simple_crypto, p11_crypto ]
#barbican_crypto_plugin: "simple_crypto"
#barbican_library_path: "/usr/lib/libCryptoki2_64.so"

################
## Panko options
################
# Valid options are [ mongodb, mysql ]
#panko_database_type: "mysql"

#################
# Gnocchi options
#################
# Valid options are [ file, ceph ]
#gnocchi_backend_storage: "{% raw %}{{ 'ceph' if enable_ceph|bool else 'file' }}{% endraw %}"


################################
# Cinder - Block Storage Options
################################
# Enable / disable Cinder backends
#cinder_backend_ceph: "{% raw %}{{ enable_ceph }}{% endraw %}"
#cinder_backend_vmwarevc_vmdk: "no"
#cinder_volume_group: "cinder-volumes"

# Valid options are [ nfs, swift, ceph ]
#cinder_backup_driver: "ceph"
#cinder_backup_share: ""
#cinder_backup_mount_options_nfs: ""


###################
# Designate options
###################
# Valid options are [ bind9 ]
#designate_backend: "bind9"
#designate_ns_record: "sample.openstack.org"

########################
# Nova - Compute Options
########################
#nova_backend_ceph: "{% raw %}{{ enable_ceph }}{% endraw %}"

# Valid options are [ qemu, kvm, vmware, xenapi ]
#nova_compute_virt_type: "kvm"

# The number of fake driver per compute node
#num_nova_fake_per_node: 5

#################
# Hyper-V options
#################
# Hyper-V can be used as hypervisor
#hyperv_username: "user"
#hyperv_password: "password"
#vswitch_name: "vswitch"
# URL from which Nova Hyper-V MSI is downloaded
#nova_msi_url: "https://www.cloudbase.it/downloads/HyperVNovaCompute_Beta.msi"

#############################
# Horizon - Dashboard Options
#############################
#horizon_backend_database: "{% raw %}{{ enable_murano | bool }}{% endraw %}"

#############################
# Ironic options
#############################
{% if kolla_inspector_dhcp_pool_start and kolla_inspector_dhcp_pool_end %}
ironic_dnsmasq_dhcp_range: {{ kolla_inspector_dhcp_pool_start }},{{ kolla_inspector_dhcp_pool_end }}
{% endif %}
{% if kolla_inspector_default_gateway %}
ironic_dnsmasq_default_gateway: {{ kolla_inspector_default_gateway }}
{% endif %}

######################################
# Manila - Shared File Systems Options
######################################
# HNAS backend configuration
#hnas_ip:
#hnas_user:
#hnas_password:
#hnas_evs_id:
#hnas_evs_ip:
#hnas_file_system_name:

################################
# Swift - Object Storage Options
################################
# Swift expects block devices to be available for storage. Two types of storage
# are supported: 1 - storage device with a special partition name and filesystem
# label, 2 - unpartitioned disk  with a filesystem. The label of this filesystem
# is used to detect the disk which Swift will be using.

# Swift support two matching modes, valid options are [ prefix, strict ]
#swift_devices_match_mode: "strict"

# This parameter defines matching pattern: if "strict" mode was selected,
# for swift_devices_match_mode then swift_device_name should specify the name of
# the special swift partition for example: "KOLLA_SWIFT_DATA", if "prefix" mode was
# selected then swift_devices_name should specify a pattern which would match to
# filesystems' labels prepared for swift.
#swift_devices_name: "KOLLA_SWIFT_DATA"


################################################
# Tempest - The OpenStack Integration Test Suite
################################################
# following value must be set when enable tempest
tempest_image_id:
tempest_flavor_ref_id:
tempest_public_network_id:
tempest_floating_network_name:

# tempest_image_alt_id: "{% raw %}{{ tempest_image_id }}{% endraw %}"
# tempest_flavor_ref_alt_id: "{% raw %}{{ tempest_flavor_ref_id }}{% endraw %}"

###################################
# VMware - OpenStack VMware support
###################################
#vmware_vcenter_host_ip:
#vmware_vcenter_host_username:
#vmware_vcenter_host_password:
#vmware_datastore_name:
#vmware_vcenter_name:
#vmware_vcenter_cluster_name:

#######################################
# XenAPI - Support XenAPI for XenServer
#######################################
# XenAPI driver use HIMN(Host Internal Management Network)
# to communicate with XenServer host.
#xenserver_himn_ip:
#xenserver_username:
#xenserver_connect_protocol:


#####################################
# Bifrost - Bare Metal Provisioning
#####################################

# The Bifrost deployment image only supports a source installation.
bifrost_install_type: source


############################################
# Grafana - Data visualisation & Monitoring
############################################

# When using the Monasca fork of Grafana if an OpenStack user with the
# same name as the admin user logs into Grafana it overwrites user data
# in the Grafana database, breaking the local admin account, and
# preventing admin API calls to Grafana. To reduce the chance of this
# happening the local admin account is renamed here.
{% if kolla_enable_grafana and grafana_local_admin_user_name is defined %}
grafana_admin_username: "{{ grafana_local_admin_user_name }}"
{% endif %}

{% if kolla_selinux_state is not none %}
selinux_state: {{ kolla_selinux_state }}
{% endif %}

install_epel: {{ kolla_ansible_install_epel | bool }}

{% if kolla_enable_host_ntp is not none %}
enable_host_ntp: {{ kolla_enable_host_ntp | bool }}
{% endif %}

{% if kolla_extra_globals %}
#######################
# Extra configuration
#######################

{{ kolla_extra_globals|to_nice_yaml }}
{% endif %}